48 Bit Case for Xiaomi MiJia Wiha bitset
Description
Doubles the amount of bit slots from 24 to 48 with an additional bottom layer. Revision: 2021-05-24 Designer: Tim Gremalm Website: http://tim.gremalm.se/ License: GNU GENERAL PUBLIC LICENSE (Version 3 or later) I really like the Xiaomi micro bit set, it have an aluminium enclosure that holds the bits safe and the bits also rattle less compared to other bit sets. But it has too few slots to cover all the bits I want, so I made a design with a lower second layer for an additional 24 bits. Each row can be populated with a bit holder out of a softer material like TPU or NinjaFlex to make the bits rattle less in the case. Each bit holder have a slot for a magnetic strip inside. A shorter bit holder is also available for bigger micro bits like hex socket. Instructions: 1.) Slice the bit case, I used PLA with a brim and no supports with good results. 2.) Choose the type of bit holders you want, I choose TPU which created some small threads. 3.) Open up the original Xiaomi caste and remove the magnets, push tom in to the slots in the bit holders. 4.) Gentle squeeze in the bit holders in the bit case. 5.) Optionally you can make some labels for corresponding bits. I Cut out 0.6mm brass plate and laser engraved the labels.
Statistics
Likes
8
Downloads
0