Voron Afterburner see-trough modular bowden adapter and 2 or 3 way Y-Splitter
Description
Voron Afterburner see-trough modular bowden adapter and 2 or 3 way Y-Splitter with quickdisconnect The switchwire Y-Splitter bowden design for the Afterburner didn't do it for my personnal setup, as I was lacking clearance above my modded Ender5+. I improved my low profile Y-Splitter design even further (https://www.thingiverse.com/thing:4850400). The removable core introduced in it's V2 gave me new ideas. I now introduce a modular core design. Depending on the core you print and mount, you can have single bowden, dual Y-Splitter ot triple Y-Splitter. Core can be changed later on if you want a different setup, or if they were to be obstrutced or worn out. The cores are uploaded as single piece or to part elements. I can confirm that the triple core can be printed vertically as a single piece using SLA. The idea is to use translucent filament for the core with 100% infill, or to print with SLA in clear resin, in order to be able to have a visual check of the splitter status. Quick fan removal is possible due to my quickdisconnect design with embedded magnets. (https://www.thingiverse.com/thing:4832526) This design may not suit a classic voron 2 design, with a Z moving gantry, but may still be of use for other Creality users or Voron 1 users. The rear part is remixed from the standard Igus bowden rear part as on the Voron Github. You may require some slight supports for the middle part's cut-out for the extruder cable management. Enjoy your prints
Statistics
Likes
7
Downloads
0