Zombicide Box Organizer
Description
**Modular Zombicide Box Organizer for all Editions** The box inserts I use to organize Zombicide: Modern Zombicide - First (1E) and Second Edition (2E), Fantasy Zombicide - Black Plague (BP)/Green Horde, and Sci-Fi Zombicide - Invader (IN)/Dark Side/Black Ops. And soon Dead or Alive (DA). Also works for Massive Darkness, although that box is a bit bigger. This system works well if you store your boxes horizontally. Everything here prints on a 150mmx150mm bed. If you just want to start printing, start with. * Modern, using the base box: 2E: 4 x Cards_A2, 4 x Mini_Cards_A1, Tokens_A1, Tokens_A2, Light_Beams * Fantasy, using a low box: Black Plague (BP)/Wulfsburg/Green Horde/Friend and Foes, using one of the smaller boxes: Cards_B, Tokens_C, Tokens_D, Tokens_E, and 4x mini-cards. * Invader, using a tall box: WIP 3 x Drawer_Chest, 18 x Chest **Configure it yourself** You can of course configure it however you like, depending on your needs. Items are typically labeled Name_W_L_H_Details A box with tiles has room for a 47mm wide holder on the side. A tall box is typically 100mm tall, most others are 80mm tall. So anything labeled Name_47_L_H_Details goes next to the tiles. The tiles are 250mm long, the inside of the box is 297mm. You can stack them, or fill the lenght up with multiple items. Frequently used items are mini card holders that are 47x136x25/50. Depending on your needs, you could put 2 25mm tall, or one 50mm tall. Other items here are the Survivor ID cards holder. On top of the tiles, next to dashboards or rules, there is room for a 31mm wide token holder, e.g. Name_31_L_H_Tokens. The height depends on how many tiles you have and the height of the box you use. You can stack these holders, too. They are typically 116mm or 134mm long, one of each adds up to 250mm, the lenght of a tile. **Survivor ID card holder:** Cards_A1, Cards_A2, Cards_B Three along and one across fit easily in the base box, the tiles can be removed, and the rules fit on top. These one-size-fits-all holder handles both ID cards of BP, IN, 2E and 2E campaign cards (objectives & notes). Campaign cards can be in their original bags, but survivor ID cards with sleeves may not fit. The day/night dials of 2E FH/DZ fit in with their campaign cards. This holder fits survivor ID cards from all editions (except the first edition large ones) There are two files Cards_A1/A2 with different z: Use 100mm if you don't put the rules book in the base box. Use the 93mm if you put the rules into this box (as opposed to with the minis). The Cards_B version is only 80mm tall and fits in one of the smaller boxes but ID cards will be stored landscape. **Mini Card Holder**: Mini_Cards_A1, Mini_Cards_A2 The low mini cards holder (A1) is 25mm tall and four stack in a base box (along the rules, not below). I move the mini cards holders to the table to play. Three of them fit in a smaller, 80mm, box, with 5mm for rules. They take (non-sleeved) mini cards from all editions. A 50mm version is available if you have taller stacks of spawn or equipment cards. **Mini Card Storage**: You can use the mini card holders for storage, but if you like to separate out different decks, look at the the Storage holders. They store cards vertically, and have differently sized gaps. These units remain in the box, you pull out the cards you want to use and put them in a mini card holder for play. **Token holders** They are the length of a tile, but in two files to print on 150mm printers. Token A1/A2 with spawns/exit/doors supports all editions (but have different height), Token B is designed for 2E pimp/objective and noise tokens and matches A1 in height. Token C matches A2 in height, and works for Fantasy and 1E. Tokens D/E are wider, and fit besides the tiles D is for Fantasy hedges/barricades and broken walls, Token E is just to store extra tokens you rarely need, but collect if you have many boxes. ** Trackers** One rack fits 3x8 trackers and 3 bases. The rack has the same dimensions as a stack of mini-cards, and thus fits into any of the mini card holders. Optional lid to reduce trackers falling out. **Light Beams** are included for your convenience in case you want to design your own token holder. They are the size of the hole not the beam. **Chest Drawers** (Deprecated, use the tracker racks instead) One drawer fits one colored mini base and 9 pin markers. One file has the drawers, one has the chest. I print the chest with the opening up. This one is for seekers of extreme organization and the first player to put them all in starts with a Pimp/Vault weapon next game. Another of your friends will scatter the 54 pieces of contents over the gaming table. I recommend storing the box with the openings up, too. Two boxes (12 sets) are 47mm wide, and fit next to tiles. **Corners** Use these around tiles that are on their own in a box. You can scale the height to the height of your tiles. 102mm is the inside of my Rue Morgue Box. Print it on it's side, so that the layer ribs go vertical when you put it in the box to minimize abrasion on tiles. This is work in progress. I am printing and testing everything as we play, and some of the pictures may show older versions. All designs were made in (free) Tinkercad. You should be able to find each model there, if you want to tinker one. https://www.tinkercad.com/dashboard?type=tinkercad&collection=projects&id=dYW5jbPYAIP
Statistics
Likes
19
Downloads
0