simple Drawer
Description
***read updates at the bottom Simple Drawer design including all files (.123dx; STL; gcode) Outer dimensions: width 295.688mm, length 265.032 mm, height 68.875mm Inner dimensions: width 238.452 mm, length 238.452 mm, height 60.807 mm Files with 95 in their name are reduced 5% in dimension - this is my personal settings as that was the max size that fitted onto my Ender printer. Included: All files : 123 design Project (everybody may change or remix for non-commercial use) (temp. removed - will be resliced) .gcode : The drawer contains ready to print gcode for Ender 3 series, sliced with Simplify3d as 1 piece or divided into drawer itself and drawer frame. Since my machine is busy, didn't print it yet. I'll be updating the comment after my first print. Update: - Drawer with holes and thinner walls added (stability not tested yet) - Frame with 3mm holes added (use washers) - Removed most of version 1 stuff except .123dx file (without screw holes and some others) - and added instead _v2 with drawer part with "optimized" wall thickness and with&without screw holes ***Parts should be inter-fitting ***Dimensions stated above may vary at this point (maybe around some couple mm at max)
Statistics
Likes
5
Downloads
0