OpenTherm Gateway Click-In Case
Description
A click-in screwless case for the OpenTherm Gateway PCB from Nodo Shop with a NodeMCU board installed. The case can be hang on a wall by using two keyholes on the back. Each hole has a separately printable internal cover that is inserted between the bottom part of the case and the PCB, and is held in place by the PCB and the grooves on the case. No glue is needed. These keyhole covers are optional and only needed to protect the PCB from scratching when hanging the case. For hanging on the wall I used two M2.9 Phillips flat countersunk screws with 5.5mm head diameter and 1.8mm head depth.
Statistics
Likes
1
Downloads
0