The E4 - (Ender Extender Electronics Enclosure)
Description
Update coming soon... The last enclosure I used was a remix. I did this one myself. So please comment for anything you do not like or think I should improve. I have printed this, and it works well! I am printing a new top cover now - I will update with my pictures when that's done and installed. This will hold the power supply, the original power switch, the motherboard, and a Raspberry Pi. The original 8-bit motherboard, both Creality's 32-bit boards (4.2.2 and 4.2.7), and Big TreeTech's SKR Mini E3 V1.2 all have the same mounting holes - whichever you have - it should fit in here. The monitors' links are below - I upgraded to the Creality V2 screen a few months ago, and I like the Maker Focus touch screens. I got a 92mm fan for the side - and I used a metal mesh fan cover, but I threw a quick design together for a picture - could be used if needed. I have the air inlet (on the right side panel) at board level for better cooling. There's room for a couple buck converters inside, a power bus, a power relay, and more? Those are 19mm buttons for power. I have a MicroSD card - SD card adapter slot in the back. Cables exit from the back right. Disclaimers: The front panel is 262mm wide... this will not print on an un-modified Ender 3 Some wires may need to be extended... Links to items used: Creality V2 Screen: https://www.amazon.com/gp/product/B08NVPW3R4/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 MakerFocus 7" LCD Touchscreen: https://www.makerfocus.com/collections/lcd/products/raspberry-pi-7-inch-capacitive-touch-screen-tft-lcd-display-for-rpi-4b-3b-5-point-touch-control-drive-free 19mm Power Buttons: https://www.ebay.com/itm/19mm-Power-Ring-Momentary-Push-Button-Switch-Latching-Waterproof-LED-Light-Car-/353200951030?_trksid=p2349624.m46890.l49286 MiroSD to SD Card adapter: https://www.amazon.com/gp/product/B01D9JIUU0/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Micro USB cable: https://www.amazon.com/gp/product/B07K4HTBSM/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 HDMI 90 degree Cable: https://www.amazon.com/dp/B078HBPGQP/ref=cm_sw_r_oth_api_glt_fabc_9VEWG6Z4N59SB2C227KT?_encoding=UTF8&psc=1 Buck Converters: https://www.amazon.com/gp/product/B01MQGMOKI/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 92mm Fan: https://www.amazon.com/gp/product/B08BLH5GSN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Ender Extender: https://enderextender.com/collections/ender-extender-kits Comments are always appreciated!
Statistics
Likes
35
Downloads
0