Wells MP5K Gel Blaster ACR Stock Adapter
Description
Wells MP5K Gel Blaster ACR Stock Adapter Used a Jinming ACR stock, you will need to cut the stock off where it mounts inside the blaster, should make sense when you see it. Unfortunately I didn't take a photo at the time... Suggest PETG or PLA+ at high infill and wall count, there is a screw hole for an M4 bolt to add a hardware connection between the stock and the adapter. The stock needs to be glued, I used 'Tarzan's grip shockproof super glue' but epoxy would also be fine.
Statistics
Likes
81
Downloads
0