REDINGTON Path 586-4 & SAGE Foundation 590-4. Fly Fishing Pole mount rack
Description
Designed for: REDINGTON, Path, line no.5, 8' 6", 4 pc., fly rods. Intended to securely fasten two assembled fly rods on the ceiling in a cap-over camper. The "reel side" is printed with TPU at 100% infill and was placed on its side for slicing. The inner diameter of the reel side hook is 0.60 inches with a 0.75 inch width and could work for a different rod. (Note: since uploading I have found my Sage Foundation 590-4 fits perfectly as well!) The "mid pole" file was also printed on its side, however, I used PLA for this component at 5%. The mid pole section final product pictured uses 0.25 x 0.75 inch foam tape with approximately 45 degree angle chamfer cuts on the outer ends. Both prints are adhered to the ceiling, semi-permanently, with 3M 1" wide double-side foam tape. 3 inches for each reel side mount (2 total), and 2 inches total for the single mid section mount. Semi-permanent usually isn't my style, but it seems plenty adequate to me. None the less, rest assured, if you're reading this now is hasn't failed me yet!
Statistics
Likes
12
Downloads
0