Small Air Purifier for TaoTronics HEPA Filter
Description
I created this Model, because most other Air Purifiers used the xiamoi Filters, which are bigger and more expensive. I used the replacement HEPA-Filter for the TaoTronics TT-AP001. I use the Air Purifier to filter the air in the room I'm printing in and it works really well. What you need: - TaoTronics TT-AP001 HEPA Filter Replacement (They are currently sold out on Amazon. You can still buy them straight from china on ebay or aliexpress. https://de.aliexpress.com/item/1005002511200591.html?spm=a2g0o.productlist.0.0.127a6343Ukag93&algo_pvid=06376652-06ff-411f-b026-0fdbb4ce0e38&algo_exp_id=06376652-06ff-411f-b026-0fdbb4ce0e38-7) Costs roughly 10€. - A 92mm Fan (I recommend you, to use a fan with a lot of power. I used a Delta AUB0912VH [You can get them for cheap on ebay: ~7€]. But anything with similiar specs [12V, 0.6A] should work fine. Fans with less Power just don't Filter the air fast enough. - 6 M2x10 self tapering screws or similiar Print the Main piece without support between the mesh. You might need support for the screw mounting parts(Support on touching buildplate).
Statistics
Likes
19
Downloads
0