CR-6 SE Z-Axis Linear Rail mount
Description
### Update 12 Dec. 2021 I'm currently working on another Z- and X-Axis linear Rail Mount thing: https://www.thingiverse.com/thing:5161688 ### Update 03 Aug. 2021 I noticed that I had a lot of wobbling after the modification. When investigating the cause, I noticed that the brass nuts had a lot of play, they had been rinsed out properly! Then I made these anti-wobbling parts (https://www.thingiverse.com/thing:4871212) with these T8 lead screws anti backlash nut (https://www.thingiverse.com/thing:4227492). When assembling I then definitely found the cause of the worn out brass nuts: The T8 lead screw was not centered with the hole in the guide, so I also created and installed the "Unterlage" (didn't find the english word), Left and Right. - This are MGM12H HiWin Linear Rails 370mm - Linear Rails should be 300-370mm - you may need 1-2 washers if the screw scratches
Statistics
Likes
16
Downloads
0