Flexible Camera Mount for 3D Printer
Description
This mount is designed to use a flexible coolant hose as a mount for a webcam to be used to monitor ongoing prints via something like Octoprint. Required Hardware: - 1 x 1/4"-20 UNC Socket Cap Screw - To mount webcam to the camera mount part - I sourced mine from [this set of camera mounting hardware](https://www.amazon.co.uk/gp/product/B085NRY7ZJ/) - 1 x Lenght of Flexible Coolant Tube with a 1/4"-19 BSP Pipe Threaded End - Forms the lenght of the mount - I sourced mine from [the spare that came with these helping hands.](https://www.amazon.co.uk/Flexible-Soldering-Resistant-Swiveling-Brushless/dp/B07233QBBS/) However I suspect something similar to [this](https://www.amazon.co.uk/SPTwj-Adjustable-Flexible-Hydraulic-machinery/dp/B08H1V4M1M) should do nicely. - 4 x 12mm M5 Socket Cap Screws - Used to mount the V Slot Cap to the end of the extrusion - Depending on your machine's configuration and where you choose to mount the V Slot Cap, you may only need 2 screws. You may also need to use some t nuts and shorter screws if mounting to the rails rather than the ends of the extrusion.
Statistics
Likes
257
Downloads
0