PORT-A-DINER Micro SD Holder
Description
**DESCRIPTION** PORT-A-DINER is the latest in interactive dining! You can see them at your nearest Super-Duper Mart, or at your trusted Slocum's Joe donut place. You only need 45 $ (exact change only)and you could have a chance to win that cake that everyone wants to get! This exclusive RobCo executive-only edition features a miniature model with a convertible dome capable of holding up to 5 micro SD cards. In addition, on each side there is a trash compartment for 4 micro SD cards. Finally, the meal dispenser is also capable for store 3 micro SD cards. Expiration date to order your miniature PORT-A-DINER model: January 2078. **PRINT INSTRUCTIONS** -Designed to be a multi-color model, as all the parts are separated in order to be printed with the adequate color. -Glue is needed for the assembly for the non-movable parts. -Enable ironing for some parts (for example the grey flat parts) is recommended for a better aesthetic results. -Use 0.1 layer height for the little name part. -In your slicer do a mirror for the other half of the dome part. -The most difficult part for 3D printing is maybe the claw, add brim and print vertically. -Depending on the z error on your printer, you will need to cut a bit of the grey stick (or scale it vertically a bit), not a big deal.
Statistics
Likes
125
Downloads
0