Smart 453 Radio Car Holder
Description
Since I didn't find what I needed for a Smart 453 radio holder, I mix and matched some other designs as following to come up with what you see in the pictures. What you need: Modular Mounting System: https://www.thingiverse.com/thing:2194278/files File: Mount Holder Flip.stl Mount Phone Clamp Knob.stl Mount Phone Clamp A v6.stl Mount Phone Clamp B v6.stl Cheap LED Light Mount Connector to 1/2 CPVC: https://www.thingiverse.com/thing:3975241 File: lightholder-5mm_knob_to_cpvc.stl Smart Brabus - radio phone Holder: https://www.thingiverse.com/thing:4204719 File: pressFit.stl car_adapter.stl Hardware: 1 x M5x65mm Screw (You can print it as well with the files in the Modular Mounting System but it is stronger if you use a screw) 1 x M5x30mm Screw (You can print it as well with the files in the Modular Mounting System but it is stronger if you use a screw) For print orientation of the "pressFit.stl" and the "lightholder-5mm_knob_to_cpvc.stl" see the image attached. You can copy the positioning of the parts (x,y,z values) but in your slicer, you'll have to be able to raise a part from the bed. It's not perfect, but is what I came up with without designing something myself (not skilled for that :))
Statistics
Likes
1
Downloads
0