Double 2.5" SSD Mounting Bracket
Description
A mounting bracket for stacking two SSD's on top of each other. The two drives attach to the brackets via the side mounting holes, leaving the bottom of the lower drive completely clear to mount to your drive bay/drive adapter/PC case. This bracket should fit any 7mm tall 2.5" SSD or HDD. When assembled, there is a 7mm air gap between the two drives to allow for ventilation. Total height fully-assembled is approximately the same as a 3.5" HDD. To assemble, you will need: * 2x Mounting Brackets * 8x M3x5mm Screws * 2x SSD's or HDD's, or mix-and-match :) Dimensions were based on mechanical drawings from: https://www.intel.com/content/dam/support/us/en/documents/ssdc/hpssd/sb/Intel_SSD_520_Series_Product_specification.pdf
Statistics
Likes
16
Downloads
0