Z Axis Adjsutable Motor Mount (one-sided)
Description
I designed an adjustable z axis motor mount that doesn't take up space on the inside of the aluminum extrusion. This is so that a rear mounted electronics box or a rear mounted PSU would also fit if necessary. Mounting the bracket to the side of the extrusion allows for some back and forth movement which allows for fine tuning of the z screw alignment while also holding the motor securely. The mirrored stl is for a second z motor on the opposite side of the printer. Required Hardware: 4 M3 x 6mm screws 2 M4 x 10mm screws 2 M4 T-nuts
Statistics
Likes
11
Downloads
0