Heavy duty 3-Axis Gimbal
Description
We Designed this Thing in a School Project as a means to stabilize our Camera and later we mounted a CM030 on it. Its not perfect yet. A few holes are not yet properly aligned, but we got it to work and it works well. You will need: - various M3 bolts and nuts (20 isch) - 1 M4 bolt and nut - several M4 Washers (for the distance gap) (alternatively use a Bearing) - 3 10 or 20 KG Servos (and accompanying screws) - 1 Servo Arm (for the rest use the discs) - kable ties for management Print: You will meed a relatively Strong Material. We used Strongman PLA, but in hindsight we should have used ABS or something more ridged. Print orientation is only semi Important. Try to get the Layer lines along the load. The Main Arm we printed upright at an Ange, so that the End touches the Bulidplate and filled in the Gaps with Supports. The Base was Printed on the Side and the Rotation Platform was printed the same way.
Statistics
Likes
1
Downloads
0