Enclosure for OAK-D-WIFI
Description
This is enclosure for OAK-D-WIFI. Let's make it! This is FDM friendly design. No support is needed. Considering that the FDM print will be a little thicker than the model, the screw size of the 3D model is designed to be slightly wider than 1/4-20UNC. This fit to 1/4-20UNC screw in actual print. Layer hight: 0.2mm is good enough for body. better to print with 0.1mm for tripod adapter. Note: Flatness of enclosure can affect the data quality of stereo cameras. Inspect the board mounting surface on enclosure. If you enclosure is not flat, and does impact depth quality, here is calibration procedure from OpenCV team. https://docs.luxonis.com/en/latest/pages/calibration/
Statistics
Likes
6
Downloads
0