Post/Pole Mount for Weather Station
Description
Note: If you have trouble downloading this model, you can also find it here: https://www.prusaprinters.org/social/55222-tyler/prints This was made to mount a post/pole to the side of something. I used it to mount my weather station (AcuRite 01536) to a fence. The diameter of the pole I used was 26mm. Because I knew it was going to take a ton of plastic and I didn't want to risk it not fitting and having to re-print it, I made the hole diameter 28mm. It doesn't matter if it's a bit loose, as the screw in the center keeps the pole from rotating or moving around too much. I made this because the mount that came with the weather station would not accomodate the pole I chose, even though it DID fit in the bottom of the weather station.
Statistics
Likes
1
Downloads
0