Kabab Powerpick Pod
Description
This is a canopy designed for the Powerpick frame. It is designed to fit Runcam Nano 2 or similar sized nano cameras. The canopy mounts with the same four M3 screws that hold the arms/frame together. The mounting holes on the canopy are a little smaller than M3 so that there is no need for a M3 nut to hold the canopy on. I have also designed a canopy for Aio cameras, foxeer pico razor, and Eos2. The eos2 has a slightly longer dimension than the runcams. There is a fixed angle of 50 degrees and another adjustable from about 25 to 35 degrees. Printed in TPU Infill is 100% Use supports
Statistics
Likes
3
Downloads
0