Box TFT35-E3 V3
Description
Scatola per display TFT35-E3 V3, sul fondo ci sono quattro fori svasati per attaccare mediante un po di colla e delle viti autifilettanti da 3 mm lunghe 10 mm, il blocco B va stampato se avete una vite a brugola lunga 60 mm passante altrimenti stampate e incollate due Blocchi A e mettete la parte incassata della testa della vite all'esterno, usate due viti a brugola M4 da 20 mm con il dado, per fissare il blocco che va sul telaio (per profilati 20x20 o 20x40) servono due viti a brugola da 10 mm e due dadi a martello per profilati 20x20. Display box TFT35-E3 V3, on the bottom there are four countersunk holes to attach with a bit of glue and 3 mm long 10 mm self-tapping screws, block B must be printed if you have a 60 mm long Allen screw passing through otherwise printed and glue two Blocks A and put the recessed part of the screw head on the outside, use two M4 Allen screws 20 mm with the nut, to fix the block that goes on the frame (for profiles 20x20 or 20x40) you need two screws a 10 mm Allen key and two hammer nuts for 20x20 profiles.
Statistics
Likes
2
Downloads
0