Ear Protector Wall/Desk box
Description
Constantly misplacing your earbuds? Put them down only to find they get dusty and dirty? Then look no further! I had the above problems so I designed this useful little box to store my ear protection in. You can either set this on a tabletop or, as I've done, screw it to the wall so you always know where they are. I have modelled two fixing/screw tabs at the back inside of the box body. Which accept standard 3.5mm screws to make this easy. Classic "ear protection needed" logo is printed on the front upper portion so you need not wonder what lies within. :-) I changed the drawer design with chamfers. This should stop "elephant foot" on the drawer bottoms which I had to trim off on my original print. 1 x Box Body 1 x Drawer knob 1 x Drawer (Empty for easy modification or general storage) 1 x Alternative drawer with inefficient "insert" that I used personally to fit my rubber noise reducing plugs. Print settings I used; Approx. print time: 2hrs 47m (Longer with Alternative drawer) -0.29 layer height -Top/Bottom layers = 2 -Infill 5% cubic Please leave a comment or post a pic if you make one! :-)
Statistics
Likes
0
Downloads
0