Scoop Riddle Funnel
Description
I designed this as I had to filter out some large stones from building sand into a narrow container. Inner riddle hole diameter is 7mm. I made a second with a very fine diameter of 2mm also. The model is very large and nearly filled the bed of my CR10, so may need to be scaled down to suit your print bed, but obviously riddle holes will also scale down if this is the case. Note:- The smaller diameter hole version was an earlier design and the handle sticks above the top of the cup. So if you print this model oriented upside down (which I believe is the best way) you might have an untidy rim due to supports and I haven't yet got around to altering this as I settled on the later design with bigger holes.
Statistics
Likes
1
Downloads
0