Anycubic Mega X Direct Drive Conversion
Description
This is a Direct Drive Extruder mod for the AnyCubic Mega X. I designed a backplate that can be mounted in place, and use all of the back details (fan, shroud, PCB carrier, etc. from https://www.thingiverse.com/thing:4555831 Once the back plate is on, the extruder itself can be removed for maintenance, etc, with only 3 front-accessible screws. I uploaded 2 versions of the backplate: 1 with holes for M3 nuts, and 1 with just holes that you can use M3 Heat inserts for. There are 2 versions of the extruder carriage as well. 1 with holes to mount a 30mm fan, and one with no holes if you use one that clips to the heat sink (like the E3d V5 or V6.) Print from PETG (or better). Backplate can be printed flat, no supports, the carriage will need tree supports. I'm using a BondTech BMG extruder, and a Haldis Red Lizard (E3d V6 size) hot end.
Statistics
Likes
9
Downloads
0