Centrifugal Dust Seperator
Description
Current Work in progress, so print at your own discretion since I am going to be modifying and simplifying the design to save on print time and materials over the next few weeks. Currently this is sized to fit a tube with the inner diameter of 112mm, if your scaling it to fit a different pipe then just make it .2 mm smaller than the ID of your pipe selection. Inlet and outlet pipe size will fit a 2" pvc coupling/rubber coupling like I plan to use. Holes are 4.1mm meant for m3 threaded inserts or they can be tapped for M5s. Dust chutes can be glued on or held down by a strap 19mm (3/4") or smaller. Some parts will need to be rotated for best printing orientation to keep amount of supports minimal. Materials Needed: M3 threaded inserts M3s 6.35mm/1/4" Threaded rod 18" 2 Nut caps 1 Lock nut
Statistics
Likes
19
Downloads
0