Immortal T antenna mount for QAV-S & Source One quadcopters
Description
This is a folding TPU holder for the TBS fullsize Immortal-T antenna to go on the QAV-S quadcopter. Print in TPU at 0.2mm layer height, no support needed. The mount holes are 19mm apart (center-to-center), and 4.9mm diameter which is on purpose so the TPU grips the 5mm standoffs.well. If you want a version to fit the standoff mount pattern of your quadcopter, leave a note in the comments containing two important numbers: Diameter of the standoff, and the distance between the two, center-to-center. I have added extra versions for the Source One quads with these measurements: Source One V3 (5mm diameter standoffs 30.5mm center to center) Source One V4 / HD / Apex (5mm diameter standoffs 23.5mm center to center) If you want a version for the current Immortal T antenna which has extra bits sticking out (presumably to help cable ties not lose their grip), either send me one or tip me enough so I can buy one and I'll happily create a version of that mount for everyone to use. Direct download from my website: QAV-S - (5mm diameter standoffs 19mm center to center) http://www.haku.co.uk/3D/QAV-S_Immortal_T_mount.stl Source One V3 (5mm diameter standoffs 30.5mm center to center) http://www.haku.co.uk/3D/Source_One_V3_Immortal_T_mount.stl Source One V4 / HD / Apex (5mm diameter standoffs 23.5mm center to center) http://www.haku.co.uk/3D/Source_One_V4_Immortal_T_mount.stl Requested version to fit 5mm standoffs 31mm center to center http://www.haku.co.uk/3D/Immortal-T_5mm_31mm_standoffs_mount.stl Requested version for Hyperlite Glide, 5mm standoffs 26.5mm center to center http://www.haku.co.uk/3D/Hyperlite_Glide_Immortal-T_mount.stl You can sell prints of this, but don't overcharge, and link back here. Tips are most welcome https://www.paypal.com/paypalme/Haku3D and will encourage me to make more designs for everyone to benefit.
Statistics
Likes
45
Downloads
0