Remote High Temperature Bed Level Probe
Description
This is the external (Outside heated chamber) part of a high temperature bed level probe. The probe has an inside part that is not available. The inside part has a retractable pin and a mechanical contact. The servo mounted outside retracts and extends the pin inside the heated chamber by pulling on a steel wire inside a spring guide. The probe can handle up to 180C chamber temperatures. The Complete probe can be purchased here: https://hightemp3d.com/products/remoteht-bed-level-probe-3d-printer?_pos=1&_sid=ef5810979&_ss=r Printing: 0.2 mm layer height. Only suports for the outer wheel. You may have to scale either the inner wheel or the outer wheel to make them interlock well.
Statistics
Likes
0
Downloads
0