tricopter drone arm
Description
This experimental 3d printed concept tricopter drone can be purchased at turbosquid for 15$ and is approx .16'L x16'W x3'H it is printed with pla and is equipped with 1400kv size motors . it came in under 200$ in parts ,not (including transmitter). the drone can be printed on small fdm printer (150mmx150mm build plate . the arms that house the esc's and motors can be easily removed and replaced by sliding a new one in and the tail is equipped with large 20kg servo for strength and stability , the list of parts ( all purchased on amazon ) 1x kk2 flight controller 1x rx9 receiver 3x 1400kv outrunner motors ( 28mm in diameter ) 3x 30amp esc 1x 3s lipo battery 1x 20kg servo 1x pack of RC 8mm wire connectors 2x 10x5x4 bearing (skateboard bearings) 1x 5mm x 50mm tubing 1x pack of 2mmx4mm screws 1x assorted servo screws
Statistics
Likes
2
Downloads
0