9in - Porter Cable Band Saw Straight Edge Guide / Fence
Description
A 3D printable straight edge band saw guide for a 9in Porter Cable Band Saw. (Might work with other brands) All parts should be oriented correctly for printing. I suggest using 15-20% infill with 1.2mm top/bottom and walls. The Connector Shaft will need to be printed with support. The Main Shaft Bolt may need a little deburring to turn smoothly in the unthreaded guide. The Connector Shaft will need to be glued/epoxied to the Main Shaft Bolt.
Statistics
Likes
0
Downloads
0