Weighted storage/companion cube
Description
# Portal weighted/companion cube ## Description This is a remix from Ellindsey's design. I simply modified the faces to replace the heart by the Aperture logo. ## Parts to print For each cube, you need : * white_edge.stl (x12) : ~2.5 hours * white_corner.stl (x8) : ~4 hours * grey_corner.stl (x8, with supports) : ~3.5 hours For the Weighted Storage Cube : * blue_face_aperture.stl (x6) : ~1.25 hours * white_face_aperture.stl (x6) : ~1.5 hours For the Weighted Companion Cube : * pink_face_heart.stl (x6) : ~1 hour * white_face_heart.stl (x6) : ~1.25 hours ## Assembly Glue not required. 1. Print all the parts 2. Put the gey_corners on the white_corners 3. Snap these two by two with the white_edges 4. Put the white_faces_<aperture/heart> on the <blue/pink>_faces 5. Create two squares, each with two step 3 assemblies and a step 4 assembly 6. On one of these squares, put white_edges on each corner 7. Snap the two squares together # Print settings ## Quality * 0.2mm layer height with adaptive layers in Cura * 10% infill (use 20% for the Companion cube if you want to respect the lore) * 50mm/sec print speed ## Supports * With supports for the grey_corners * Without supports for the other parts * No raft
Statistics
Likes
42
Downloads
0