Face plant pot
Description
The idea is not original, the design is. Those ears on the sides are for watering the plant. I've designer it in fusion 360 on pc and nomad sculpt on ipad. At first I've made it big and round, but with a 0.4 mm nozzle it took more than 8 hours. For the first one I've used a strange filament and paint it with acrylic paint to cover the ugly change in color of the material. Then I've came back and defined even more the features of the face and reduce it in size for a faster print time and I've printed it with yellow PLA in about 4 hours. I've tried to design it so it doesn't need supports. Under the nose are some minor problems and also the bridging of the ears tend to make some strings. If you can, maybe drag it in blender or some sculpting app and raise the bridge in the shape of an arc if that is bothering you. The original brown vase that the plant came with is 86 mm at the top and 68 at the bottop. I'll recommend for the small one to increase it's size in the slicer with 1-2% because it's a little tight and the water doesn't flow as easily. I hope you like it and if you become a millionaire selling those, it would be nice a 5$ tip.
Statistics
Likes
7
Downloads
0