Three color Captain America Shield (For single extruder)
Description
A simple model of the famous shield of Captain America. This is made for single extruders and consists of four parts in three colors. The Base.stl model has four holes for magnets with a diameter of 5mm and a height of 1mm. If you want to add your own magnets or don't need them at all, I've uploaded the BaseClean.stl. Per model settings === The whole print took about 5 hours with filament switches and assembly. If you want to save some time, you can use the following settings ### Base.stl * Resolution: 200 * Infill: 30 * Speed: 55mm/s ### Ring.stl * Resolution: 150 * Infill: 30 * Speed: 55mm/s
Statistics
Likes
3
Downloads
0