1/87 APC
Description
Old Print. Approximately 1/87 Scale. On The 1Mm Version, The Axles Are 1Mm Brass Rod Cut To 30Mm. The 2Mm Version Has Printable Axles, But Were Unsucessfully Printed. Both Models Need A 8.5Mm - 9Mm Long 1Mm Rod For The Rear Door. This Is A Model I Created A While Ago, And I Will Probably Revisit It And Recreate It In A More Detailed Fashion. Features Include: -Removable Top -Swiveling Turrent -Sliding Side Doors -Swing-Out Rear Door -Free Rolling This Model Was Created In Designspark Mechanical And Printed On A Zortrax M200 At 140 Micron In Cool Grey. A Little Warning: This Was When I Was Starting To First Use Dsm To Model For 3D Printing, So Some Parts Are Not Perfect, Such As The 2 Pegs In The Back To Hold The Top On. I Had To Break Them Off As There Was Not As Much Clearance As There Should Have Been. The Top Is Also Not As Secure As I Would Have Liked It To Be.
Statistics
Likes
95
Downloads
0