CR10/Ender 3 Fanduct V4 for MicroSwiss DirectDrive (Dual 40mm Part Cooling)
Description
This is a new reworked version of my original CR10/Ender3 MicroSwiss DirectDrive Fanduct: https://www.thingiverse.com/thing:4277669 . . . The new versions have a few key differences to my first approach: . . V4.0: (DISCONTINUED) -Modular design to take my Combined Universal BLTouch/Probe mount: https://www.thingiverse.com/thing:4856597 -Updated measurements based on my Fusion360 model of the MicroSwiss DirectDrive: https://www.thingiverse.com/thing:4791971 -Removable Cable Guide to organize the cables with zip ties . . . V4.1: (Includes all features from V4.0) -More compact design, but probe positions had to move further away from the nozzle -Bigger opening at the bottom of the duct to prioritize air flow over air pressure -Relocated some screw locations to allow for easier (dis-)assembly -Rounded edges at the back of the cable guide to allow better fitment with cable ties -This version can still be fully printed without the need for any supports when located with the back side down on the bed! . . . -The Front Fan Adapter V4_1_1 has a slight design improvement to focus the airflow more onto the actual heatsink. -The Front Fan Adapter V4_1_2 now also includes a second position for mounting a BLTouch! . . . All mechanical connections are to be made using standard M3 screws. I recommend using washers with the two screws securing the fan duct to the aluminium MicroSwiss plate. . . The XY-Offsets can be adjusted to fit this design sending the following commands followed by an M500: . . V4.0: BLTouch: M851 X-44,87 Y-37,402 18mm probes: M851 X-37,263 Y-53,716 V4.1 and V4.1.1: BLTouch: M851 X-48,467 Y-46,252 18mm probes: M851 X-40,86 Y-62,565 V4.1.2: Additional BLTouch mount: M851 X33,032 Y-36,249
Statistics
Likes
18
Downloads
0