CMW Massive Droner HD 3" - TBS CF Nano/Immortal T Mounts
Description
Worked up these mounts to pack a TBS Crossfire Nano and Immortal T into the very limited space on a CMW Massive Drone HD. Printing: Everything will need printed in TPU. Qty for each piece is 2 .20mm Layer Height 20% infill Priline TPU filament Printed on Prusa MK3s using Prusaslicer with SainSmart TPU settings. Assembly: The Immortal T "base" slips over the rear uprights and the Immortal T is zip-tied on the back (see rear pic). The antenna ends are clamped under the motors with the aptly named "clamps". Only change is 1mm longer screws for the motors are required. The receiver is mounted on a top standoff in front of the Vista unit and behind the camera. Friction holds the mount on the standoff and you sandwich the receiver between them. I did it this way so I could access bind button and see indicator lights (see front pic)
Statistics
Likes
2
Downloads
0