Deck Crane (like a Hiab) 1/24th Scale
Description
This is a prototype, but seems to work okay, I have one installed on my MV Conserver. It is 1/24th scale, and requires a bit of assembly. I used some 3mm stainless rod to make the main boom hinges and the hydraulic piston shafts. The hydraulic lines are made from a bit of old ribbon cable from an old PC. When printing you'll need to choose the base you wish to use (round or rectangular) and then print one copy of each file except for the following: Actuator Cylinder x3 Short Pin x2 Long Pin x2 (You won't need all the pins but I can't remember the combination of pins) This is very much a work in progress and when assembled is a rigid model not articulated, I used a 2 part epoxy to fix the crane in the position I wanted.
Statistics
Likes
36
Downloads
0