Prusa I3 MK3S Endoscope Support
Description
I searched a while for a good solution to watch printing via Endoscope Camera, but did not find one working for me. So I decided to build one. The 8 mm Camera I used is a very cheap one from eBay (https://www.ebay.at/itm/123790324229?var=424455779632), important is the minimum focus of 30 mm or less. The led's are 5 mm planar white connected parallel to a 20 mA constant current power supply (Amz.: https://www.amazon.de/gp/product/B0758BT47N/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8) which is himself connected to the 5V Power of the Noctua nozzle ventilator. The Endoscope cable runs the same way as the finda cable, I modified x-carriage and extruder-body to be able to. Take a look at the pictures to see. Printing: 0.2 mm layer heigth, support needed for print-fan-support and fan-shroud. Fan-shroud is better to print with ABS or ASA
Statistics
Likes
2
Downloads
0