Elegoo Mars Resin Vat Slide Cover
Description
Resin vat slide cover for Elegoo Mars to protect vat on and off printer. Designed to slide under screw mounts or placed on top when vat is removed. Other designs either cut around mounts leaving some areas exposed or only work off the printer. Can greatly reduce light exposure, dust and fumes between prints. Should allow resin to safely stay in the vat longer but I do not suggest it as a replacement for proper storage. Likely compatible with Pro and other versions but some modifications may be needed. My machine has about a ~1 mm gap between the vat and bottom of screw mounts. Dimensions: 120.8 (W) x 174.8 (L) x 4.2 (H) Slide Height: ~0.85 mm ** Too large to print on Mars in one piece. IF COVER IS TOO TIGHT: Make sure mount screws are loose enough then try lightly sanding the slides or add a light lubricant oil. Layer height could be adjusted to reduce slide thickness if necessary.
Statistics
Likes
23
Downloads
0