Eryone Thinker / ER-20 mount plate for Tech2C's E3Dv6 Bowden X-carriage mount
Description
The purpose of this remix is to fit Tech2C's excellent, minimalist design onto Eryone printers' stock X mounting plate. I specifically designed it for the Thinker SE, though this should work just as well with the Thinker S and the ER-20, as the mounting holes are the same. **Update v5:** This is the final version, I think. I intend to move to linear rails shortly, and this version fixes the little niggles I had with the previous ones. Changes: * Added short arm to act as a wire guide (use a zip tie or something) * Clamp is shifted slightly to the right, so the nozzle can reach X300 * Nuts will no longer fall through the slots on the clamp (but there are holes to push them up/out, if needed) * Sacrificial layer (0.2mm) added for the screw holes, be sure to drill them out * Use really short screws for fan duct (if you need to - I find friction fit works good enough) else you'll hit the metal plate behind them I have made a linear rails adaptation of this mount, here: https://www.thingiverse.com/thing:4916135
Statistics
Likes
10
Downloads
0