3dsets Rancher trans mount for Injora planetary transmission.
Description
These were modified to fit under the Rancher's dashboard and shortened to make best use of the space under the Rancher's hood. The planetary transmission was pushed back to the point where the top motor mount screw is just in front of the firewall so you still have access to remove the motor. I was able to fit a 550 motor in with this space by just filing the servo mount for clearance, a 540 requires no mods. I slotted the mounting holes for the transfer case as my transfer case didn't line up and was unsure if it was just variations, I slotted so any of these variations would fit. You will require a rigid coupler 5mm x 5mm that is 25mm long. These are cheap and easy to get here is two for example. https://www.ebay.com/itm/181965704615 https://www.ebay.com/itm/323139562833 Print it how you would normally print the trans case for the Rancher and you will be fine.
Statistics
Likes
0
Downloads
0