Compact toothbrush holder (wall or mirror mount)

Compact toothbrush holder (wall or mirror mount)

Description

Designed this to simply clip-in and hold toothbrushes. The handles of ours were too thick to fit into most other holders, so needed something that would keep them dry and safe, but also easy to grab when needed. Also wanted to minimize filament usage, so I designed it as a simple yet effective clip which should hold most non-electric toothbrush designs. Printing: Printed mine vertically (that is, the wide, flat side standing UP). This doesn't give a lot of surface area for bed adhesion, but the clips should be stronger when printed this way. Printed with 3 walls and 25% infill; really shouldn't matter much though unless your brush is super heavy. I'd just recommend using enough walls so that the little clips *do not* get infilled. They will probably clip a little better that way, though should work basically no matter how you print them. PETG might be a little more durable due to its flexibility, but PLA/ABS/TPU should work fine as well. Mounting: The design was made with a command strip mount in mind, so it's just about the size of the medium one. You could definitely mount using any sort of double-sided tape though.

Statistics

Likes

2

Downloads

0

Category

Bathroom