Synology D6 Tray
Description
Could not find a compatible tray to fit my DS1815+ NAS. This design uses screws to hold the hard drive in place. It is currently only compatible with 3.5" HDD's however an adapter could be printed to use 2.5" drives. The design is not a replica of the originals and uses the flexibility of the plastic to unclip the tray from its place. Lettering on the front has been removed in STL Printing: 0.2mm layer height Black PLA+ 10% infill. Should not require a raft however supports are needed in the screw holes.
Statistics
Likes
7
Downloads
0