Winter One Ram Cooler HardwareLabs 280 Artic P14
Description
This is an adapter that attach to the top and bottom fans of a dual rad setup in a winter one, Specifically designed for HardwareLabs 280 ( Maybe works with OEM ones like corsair) and Artic P14 fans. Orientation of all rad ports should be pointing to the IO plate. Tested with Noctua Fans and attached with M3 screws and nuts, but will work with M4 screws and nuts if your screw goes through the whole Fan. Ram used was Trident Z Neo. The only reason to have this mod is if you have a really high binned B-Die and the XMP runs at more than 1.4 V, as the chips start to have errors around 50/55 degrees during NN loads that hit the ram like a truck. My kit is a trident Z Neo 3800Mhz CL14 at 1.5V XMP profile. You should change the shape in Cura to put on the bed surface the face that has the screw holes for the fans.
Statistics
Likes
0
Downloads
0