Trackstar One cell ESC replacement case
Description
A replacement case for a Trackstar One cell ESC, used in 1/12th racing. Might work for other, similar ESCs but I don't have one to try. It has thicker walls than the original, needed to do this so it could be printed, it's about 2mm wider/longer than the original This was my first 3D design, I used it to learn Fusion 360. I have included the native Fusion 360 files if anyone wants to adapt this. *To ensure the heatsink on the MOSFETs makes contact to the read heat sink, it was necessary to add some neoprene to ESC_Bottom.stl to pad it out. It now works nicely.* Print using PETG, my original case broke and I wanted a strong replacement. The two halves are glued together using a hard plastic glue.
Statistics
Likes
0
Downloads
0