Ultimaker 2 Fan Shroud Mount Blower Fan
Description
Hi! made a lighter blower fan mount/shroud for UM2+ type olsen block. Got the weight reduced by Half compared to stocked metal fan shroud. Most importantly it cools better than the stock fan shroud w axial fan. Able to print overhangs up till 50deg before drooping. You can print without any support. Please use ABS as the fan shroud is very near the nozzle. Would need some longer m3 screws and 2 x 3010 Blower type Fans. 2 x washer on the left as when mount so that there is a small gap between the fan shroud and the nozzle heatsink. Thank you.
Statistics
Likes
1
Downloads
0