Craftsman 16 gallon Wet/Dry Vacuum 2 Cyclone adapters
Description
This is how I set up my New 16 gallon Craftsman Shop Vacuum with a Cyclone Dust separator. There are several videos on doing this with Rigid brand shop vacuums but I didn't find any for the Craftsman. YouTube video: https://www.youtube.com/watch?v=yT_cNxbVPxo First off the width of the 16 gallon Craftsman is such that anything larger than a 1" PVC for the posts will be pushed out due to hitting the sides of the vacuum. The reducer shown in the pics. is 2" to 1.5" but I ended up going to 1" in the end. Here is what the files are for, how many of each to print and where they go. (4) 58mmBushing.stl (Print these thick side down. They go on the casters to eliminate how loose the 2" PVC couplers are.) (1) CrftsmnStr82-2inPVC.stl (This goes directly from the Vacuum intake to the 2" PVC elbow) (1) 2inPVC2CycloneAdapter.stl (This goes from the 2" PVC Long Sweep elbow to the top of the Cyclone. P.S. it's the same file as the "Crftsmn2CycloneAdapter.stl" I just made a copy and renamed it for those that go by what the name implies) (1) Crftsmn2CycloneAdapter.stl (This connects the 2.5" Vacuum hose to the Cyclone and is the same file as the "2inPVC2CycloneAdapter.stl" above) Right now Ace Hardware has the 16 gallon wet/dry Shop Vacuum on sale for $90 until June 29, 2021 ($40 lower than elsewhere). Naturally that's plus sales tax. They were all printed with TPU of whatever color I had on hand that would be enough for the part to print completely. I used 3 perimeters, top & bottom with 20% infill
Statistics
Likes
1
Downloads
0