BangGod Sharkbyte VTX & CRSF Immortal-T Antennas Mount
Description
Dual mount for the TBS Immortal-T Antenna and a SharkByte VTX Antenna on the Catalyst Machine Works BangGod frame. I used the TrueRC Singularity MMCX. Mount slips over the rear standoffs. The Immortal-T slots into the mount before pressing the standoffs through. MMCX cable pushes through the tube structure. I use the word **pushes** deliberately. The tube is designed to be tight on the MMCX and the cable to improve retention if the antenna element gets caught on anything, in addition to the rings to retain a cable tie near the element. You will need to push the connector through the tube with the assist of a fine flat blade screwdriver - be gentle to avoid damaging your antenna cable or connector. VTX Antenna mount is off center to align with the TX5M.1 VTX and aligned with the RF board being the topmost board of the stack, and the VTX being mounted with 2mm TPU washers.
Statistics
Likes
1
Downloads
0