Storage Tube for 1.75" Roll Bar
Description
This is a storage system I designed to mount a 4" ABS pipe on the roll cage of my sxs. The caps use a 7mm (actual diameter) or 1/4" Nominal Diameter o-ring made from bulk o-ring stock or you could just print one from TPU. The o-rings are a very tight fit so you will need to lubricate them with silicone or some other PLA safe lubricant. The plugs should work on any tube with a 4" I.D. and the clamps should work on any tube with a 4.5" O.D.
Statistics
Likes
3
Downloads
0