SFF Case Cube 2.0
Description
This is a work in progress build of my redesign of the SFF Case Cube 1.0. The original design was made by @Gunnthorian. I hope this design fixes all downsides of the version 1.0. This case supports: - 300mm GPU - SFX PSU - (M)ITX motherboard - Standard CPU tower coolers with fans up to 120mm. I used the measurements of the scythe mugen 5. - 2.5inch SSD and HDDs should definitely fit, 3,5inch could get tricky - 120mm fan in front (depending on your cpu-cooler setup, you may be able to put a 120mm fan in the back) - side IO Shield Things you will need besides the printed parts: - All panels are planed as acrylic, but 3mm wood would also work. Therefore you would need a laser cutter or a steady hand for cutting wood ;) - Screws and Threaded inserts: ~30(pieces): M3x6mm L x 5mm OD threaded inserts ~30(pieces): M3x10mm screws - Front IO ( i used this: https://smile.amazon.de/gp/product/B007XCMQHS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 , but its not available at amazon right now) - PSU Cable-Extension C13-C14 or similar ( https://smile.amazon.de/gp/product/B002Y4PT92/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 ) Feel free to comment if you have suggestions. The files will most likely also be hosted on cults3d.
Statistics
Likes
3
Downloads
0