Offroad Box Trailer RMX
Description
I edited and designed, created and added a lot around to this ultra cool trailer. There are lots of parts i made and others i gathered, i cannot claim some of the parts as mine. i include everything in this build that you need to make a swing arm tandem axle, the axle blocks are converted so that you can use 10x5x4mm ball bearings and M5x35mm machine bolts as axles. All the holes i set are more or less just meant to be templates to guide your drill. I found out that the wholes usually vary and resize a wee bit during printing and you've got to drill them anyway. This way at least you can chose the screw sizes better. I printed it completely in PETG, it's pretty strong and runs great. I had the trailer behind my 6x6 and it followed easy and true and doesn't have problem at all on concrete, dirt, lose gravel, high grass and even small obstacles. Since the swing arms are not mechanically balanced, it's not advisable to take it rock crawling at all ... the wheels will most likely get caught and break something, but it's an excellent trail follower. :-)
Statistics
Likes
7
Downloads
0