Micro Manipulator
Description
This is an easy to print manipulator. It uses only about 1 meter of material. It is small and will break easily if overworked, so it is of no use to you, but it works like a machine. After printing is finished, gently twist the lever or rod part or use a cutter to remove the adhesion. If the adhesions are properly removed, you can push and pull the ring to open and close the gripping part slightly. The loop spring part can be easily broken if strong force is applied. On the other hand, if you apply only weak force, the spring will remain stiff for a long time. If you bend it moderately and deform it plastically, it will continue to work well for a while. There are two types of data. The one with the file name "manipulator" closes the gripping part when the ring is pushed in, and the one with the file name "reverse operation" closes the gripping part when the ring is pulled. I made this as a challenge to design the mechanism that is established by bending the material as small as possible, so I didn't attach much importance to how well it could be used. It's good for people like me who find it interesting to see how this works, or for people who want to show it to children and give them hints on how to make something, but if you really want to use it for something, click here. https://www.thingiverse.com/thing:4894303 The manipulator attached as a bonus of the data can be used more properly.
Statistics
Likes
45
Downloads
0